Sans Digital iSCSI STORAGE Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
4.3 Quick install
You can use “Quick install” function for quick con gure. On RAID levels 0, 1, 3, 5 and 6, the system will
automatically calculate the maximum available capacity, which is subject to the number of your hard
disks and currently available capacity.
Step 1 Select “Quick install”, the system will ask you to con gure the RAID level, as shown in
to gure 4.3.1. After con guring the RAID level, click “
” to enter next page
to con gure “LUN”.
Figure 4.3.1
Step 2 Please select a Logical Unit Number (LUN). The wildcard “*” indicates that every host is
allowed to access this capacity. You can change the volume size in this page. The maximum
volume size will be automatically shown on this page. Input a value speci ed a size
less than or equal to the maximum volume size, and click “ ”.
Step 3 Con rmation page. The system will display all the related information as shown in
Figure 4.3.2. If the information is correct, click “ ”.
Figure 4.3.2
26 RAID Introduction
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 85 86

Comentarios a estos manuales

Sin comentarios